Cold Balanced Control Programmable Temperature Test Chamber 2000L
Temperature Cycling Chamber
Technical Specifications:
| Control Mode | Cold Balanced Temperature and
Humidity Control System |
| Operating Temp. & Humid. Range | +5℃ ～ +35℃; <85%R.H. |
| Internal Dimension | 2 * 1 * 1m (W * H * D) |
| Temp. Range | -20℃ ~ +100℃(150℃) |
| Humid. range | 20% ～98%R.H. |
| Temp. & Humid. Fluctuation | ±0.5℃; ≤2%R.H. |
| Temp. & Humid. Uniformity | ≤2.0℃; ≤3%R.H. |
| Temp. & Humid. Resolution | 0.01℃; 0.1%R.H. |
| Temp. Heating Up Time | 0℃ ~ +100℃within 30min; -20℃ ~ +150℃within 45min |
| Temp. Pull Down Time | 20℃ ~ -40℃within 60min; 20℃ ~ -70℃within 85min |
| Power Supply | AC380V, 50/60HZ, Three-phase (Specified by User) |
| Exterior Material | Stainless steel with baking paint |
| Interior material | SUS304# Stainless steel |
| Insulation material | Rigid Polyurethane foam |
| Refrigeration System | Mechanical cascade refrigeration system; Fin type radiator |
| Circulation system | Mechanical convection system |
| Humidification Water Supply | Automatic water regulating, recoverable supply system, water
shortage alarm system |
| Water Quality | Distilled water only, 20L Water tank capacity |
| Controller | Touch Screen Controller HL-1000 |
| Safety Devices | Overheat protector Switch, Compressor overload protector Switch,
water shortage protector Switch, Humidifier protector Switch, Fault
alarm system |
| Accessories | Viewing window, Chamber Illumination,
Cable port ø50mm, Product shelf slides 2 pieces, Universal casters,
Touch screen controller HL-1000 |
Note:
1, The performance values are no specimen inside the test area.
2, At 20℃ ambient temperature, relative humidity 65%RH, rated
voltage
3, According to IEC60068-3-5:2001 and IEC60068-3-6:2001
4, The above specifications are for reference only.
iTemp Series Products Conform Following Standards:
1, IEC60068-3-5-2002 Environmental testing-Part 3-5 Support
documentation and guidance-Confirmation of the performance of
temperature chambers.
2, IEC6068-3-6-2002 Environmental testing-Part 3-6 Supporting
documentation and guidance – Confirmation of the performance of
temperature/humidity chambers.
3, IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing
method
4, IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing
method
5, MIL-STD-202F (GJB360.8-87) High temperature life testing
6, MIL-STD-810D (GBJ150.3) High temperature method
7, MIL-STD810D (GBJ150.4) Low temperature method
8, IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing
method
9, IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat
testing method
10, MIL-STD-810D (GJB150.9-93) Moist heat testing method
