RCA Tape Abrasion Tester for Surface Coating Specimens Conform ASTM F2357-04

Brief Introduction:

RCA Tape Abrasion Tester is suitable for abrasion resistance test of various surface coating (electroplating, baking paint, screen printing, etc.) test specimens.

After rolling the non-oiled paper or tape and the sample, it can be rotated The number of discriminating the effect of its wear.

Tape abrasion tester based on standard: ASTM F2357-04

With RCA special tape, apply to the surface of the product with a fixed weight (55g, 175g, 275g).

Fixed diameter roller and constant speed motor with special counter. The wear resistance of the product is determined by the number of times the product can withstand wear. Widely used in mobile phone surface coating performance testing.

Technical Specifications:

Standard Delivery:

1, Weights 55g, 175g, each one
2. Hexagon wrench
3, Level
4, Magnifier
5, Binder Clip
6, O-ring
7, One roll of paper tape

Application:

The RCA Abrasion Wear Tester is used to test surfaces for resistance to abrasion and wear. Typically used on painted or plated organic finishes, foil, and inked key pad lettering.

This tester is widely used as a standard for many silicone key pad and membrane switch manufacturers. This abrader is used as a standard to the auto, appliance, cell phone, plastics, and coating industries. It uses an inexpensive roll of throw away abrasion paper. All build-up error is eliminated and consistent readings are easily obtained.

The RCA Abrasion Wear Tester was designed to test numerous shapes and finishes with ease and consistency. A simple change to the adjustable vertical shaft will allow for testing flat, convex, and concave shaped surfaces.

They can be used to test painted and organic finishes, foil, and inked keypad lettering for resistance to abrasion and wear. These testers have become a standard in automobile, appliance, electronics, cell phone, plastics and coating industries.

iqualitrol is a professional company to supply quality control instrument and repair service. The main products are industrial video borescope, hardness testers, metallographical instrument, metallurgical microscopes, temperature test chambers, etc.

These are widely used in machinery, mold, metal, rubber, connectors, household appliances, printed circuit boards, medical equipment, and so on.

Our sales and service staff are well trained and experienced. They can give professional advice to customers and recommend suitable equipment according to specific requirement.