Easy Calibration Portable Digital Barcol Impressor Hardness Tester
ASTM B648 for Aluminum Alloy
Brief Introduction:
iBar-H1, a digital indentation hardness tester, It is characterized
in that provided with a balance positioning, a digital display of
hardness value, and a non disassembly calibration and adjusting.
iqualitrol iBar-H1 comes with good stability, convenient
calibration, and high accuracy of detection. It is mainly used in
aluminum processing industry, testing pure aluminum, soft aluminum,
thick aluminum alloy, aluminum strip, aluminum rod, aluminum
castings, aluminum forgings and aluminum alloy products. Also, it
can be used for glass steel industry.
The relevant standards for iqualitrol iBar-H1 are ASTM B648-00,
ASTM HD2583-07, and GB/T 3854-2005.
Features:
1, Small in size, portable. Single hand operation, easy to use. Can
be used in any occasion as long as the hand can reach.
2, Wide test range, can test from very soft pure aluminum to a
particularly hard aluminum alloy. effective test range equivalent
to the Brinell Hardness of 25~150HB.
3, No need to be supported. Just test on one side of the sample
with the hardness tester, no need to be supported. It is suitable
for the test of large and extra thick workpiece.
4, With the maximum hold function, recording the maximum hardness
value during measurements.
5, Can be used for measuring Barcol Hardness, other hardness value
can be calculated out by the experimental curve. Such as Brinell
Hardness (HB), Vickers Hardness (HV), Webster Hardness (HW),
Rockwell Hardness (HRB/HRE/HRF/HRH).
Technical Specifications:
| Parameters | Barcol Hardness (Hba), other hardness value can be calculated out
by the experimental curve |
| Measurement Range | 0~100 HBa, equivalent to the Brinell hardness of 25~150HB |
| Resolution | 0.1 HBa |
| Indication Error | 81~88 HBa±1 HBa |
| 42~48 Hba±2 HBa |
| Repeatability Error | 81~88 HBa±1.5 HBa |
| 42~48 HBa±2.5 Hba |
| Operating Condition | Temperature: 0~50°C |
| Humidity:<80%rh |
| Size | 170x63x82 mm |
| Power Supply | 2x1.5vAAA Um-4 Battery |
| Weight | 390g (Not Including Batteries) |
Standard Delivery:
| Standard Accessories | Main Unit |
| 2 Pins |
| 2 Standard Blocks |
| Pin Length Calibration Block |
| Screw Driver |
| Spanner, |
| Carrying Case |
| Operation Manual |
| Optional Accessories | Bluetooth data output |
