End Quenching Fully Automatic Rockwell Hardness Tester 420HRSS-150ZT3.2 Motorized Lifting Structure

Brief Introduction:

The iqualitrol 420HRSS-150ZT3.2 (end quenching) is a precision sensor loading fully automatic Rockwell hardness tester that can automatically perform multi-point and multi-piece Rockwell hardness measurements and batch measurements, automatically generate inspection reports, and draw displacement-hardness curves or end quenching curves of samples.

The test process is fully automatic, place the sample, press the "start" button to get multiple hardness values.

The end quenching test is a standard method for determining the hardening ability of a certain metal and alloy material. The equipment meets the standards

GB/T225 and ISO 642 "End quenching test method for steel hardenability", and

ASTM A255 "Test method for determination of steel hardenability"; the hardness tester accuracy meets GB/T230.2 ISO6508-2 and ASTM E18.

Features:

● The hardness tester is a fully automatic digital display full Rockwell hardness tester with high test accuracy. It can be separated from the end quenching automatic system, and meet different Rockwell hardness test requirements; it has a novel appearance, complete functions, convenient operation, clear and intuitive display, and stable performance;

● 8-inch LCD touch screen interface, simple and convenient operation, can display the current test scale, test force, test indenter, dwell time, hardness conversion value, indenter type, etc.;

● One-button start, Z axis automatic lifting, workpiece automatically approaches the indenter, test force is automatically loaded, sensor force closed-loop control, automatically complete the entire test process, and display the test hardness value on the screen;

● XY automatic coordinate test table automatically moves along the X-axis and Y-axis directions according to the settings;

● Automatically apply the initial test force and the main test force, and the test force is applied, maintained, and removed automatically;

● Automatic test force compensation, high force value accuracy; convex hardness value can be automatically corrected;

● With software calibration function; dynamic display of displacement-force value curve during the test process, easy to observe and analyze;

● The upper and lower limits of the test hardness can be set, and the buzzer will automatically prompt when the hardness exceeds the limit;

● A total of 30 scales, 15 Rockwell hardness scales, and 15 surface Rockwell scales;

● Equipped with USB and RS232 data interfaces, convenient for users to process data;

● With database storage data function, test data is stored synchronously and can be exported;

● Equipped with a micro printer, which can directly print hardness test results;

● The hardness tester accuracy complies with GB/T230.2 ISO6508-2 and American ASTME18;

● For end quenching test, the end quenching device can automatically measure the hardenability curve of up to 6 end quenching specimens at a time;

● Coordinate points can be set independently, and fully automatic end quenching test and batch testing can be carried out, which greatly improves efficiency;

● Various fixtures can be customized, and batch testing can be carried out on different samples; users can customize special inspection reports; all continuous test data can be exported to the report multiple times or once.

Technical Specifications:

XY Automatic Coordinate Test Table Parameters:

● XY automatic stage, adopts a new dustproof structure, high-precision ball screw drive, precision linear guide rail, effectively ensures high precision, high load, long life, good dustproof effect and other characteristics;

● Automatically move the sample to the next measurement position, fast movement, high movement distance accuracy, automatic control of sample movement distance, maximum process 100mm, minimum step (resolution) 0.01mm; measurement points and measurement positions can be set; according to the corresponding standard requirements or manually input parameters;

● Sample clamping device: easy to load and unload, 1-6 end-quenched samples can be placed each time;

● Stage platform size 130x120 mm; running accuracy 0.003 mm; X Y axis travel is 100 mm respectively, and the maximum center load is 30Kgf;

● X-Y stepper motor drive device; Rockwell test software automatically controls the test process, analyzes and displays the test results;

● Automatically generate test reports and draw the hardenability curve of the sample; the test method can be compiled and stored, and the test method and test data can be directly called up during the next test without re-compilation of the test method and calibration.

Software Interface:

Main Accessories:

● XY automatic coordinate test bench: 1 piece

● Automatic coordinate test bench controller: 1 piece

● Special control software: 1 set

● Test fixture: 1 set

● Small flat test bench: 1 piece

● V-type test bench: 1 piece

● Diamond cone indenter: 1 piece

● Φ1.588mm tungsten carbide alloy ball indenter: 1 piece

● Standard Rockwell hardness block: 5 pieces

● Standard surface Rockwell hardness block: 4 pieces

● Micro printer: 1 piece

● computer: 1 set

iqualitrol is a professional company to supply quality control instrument and repair service. The main products are industrial video borescope, hardness testers, metallographical instrument, metallurgical microscopes, temperature test chambers, etc.

These are widely used in machinery, mold, metal, rubber, connectors, household appliances, printed circuit boards, medical equipment, and so on.

Our sales and service staff are well trained and experienced. They can give professional advice to customers and recommend suitable equipment according to specific requirement.